Taurus V6-183 3.0L VIN U FI (1993)
Voltage Meter
1.
Connect the positive lead of the voltmeter to the S terminal of the regulator wiring plug. Turn the ignition switch to the ``On.'' position. Do not
start the engine.
2.
The voltmeter reading should indicate battery voltage.
3.
If there is no voltage reading at the S terminal, check for voltage at the battery feed wire at the alternator.
^
If there is no voltage at the battery feed wire, check for an open fusible link or an open wire between the battery and the alternator.
^
If there is voltage, check for an open wire between the S terminal of the regulator wiring plug and the alternator or a defective alternator.
