Taurus V6-183 3.0L VIN U FI (1993)
Alignment: Service and Repair
FRONT CASTER & CAMBER
1. Prior to aligning the front end, the subframe alignment must be inspected using the following procedure:
a. Loosen subframe to body attaching bolts.
Fig. 1 Front Suspension
b. Install a 3/4 inch outside diameter pipe or similar tool into lefthand front subframe and body alignment holes.
c. Align lefthand front subframe and body alignment holes, then slightly tighten lefthand front subframe attaching bolt.
d. Repeat previous alignment steps on righthand front alignment holes, then inspect lefthand front alignment again.
e. Tighten subframe attaching bolts to specifications.
