Taurus V6-183 3.0L VIN U FI (1993)
4.
Position the strut shield as shown, with the mounting tabs behind the strut bracket.
5.
Install the stabilizer bar link. Tighten the nut to 77-103 Nm (57-75 lb-ft).
6.
Install the supplied retaining bolt through the strut shield mounting tabs and strut bracket. Install the bolt from inside. Tighten the nut to 77-103
Nm (57-75 lb-ft).
7.
If a new stabilizer bar link was installed1 tighten the lower retainer to 47-63 Nm (35-46 lb-ft).