Taurus V6-183 3.0L VIN U FI (1993)
10.
Place upper strut mount spacer (18A027) over the three strut mount studs prior to reinstalling the strut assembly, so the spacer is sandwiched
between the underside of the shock tower and the upper strut mount. This procedure must be performed on both right and left hand front strut
assemblies. Refer to Figure 1.
11.
Reinstall the front strut assemblies with spacers according to the applicable Taurus/Sable Service Manual.
^
1991 Pages 14-10-10 through 14-10-11, steps 6 through 20.
^
1992 Pages 04-01-16 steps 6 through 20.
^
1993 Pages 04-01-15 through 04-01-16, steps 6 through 20.
