ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Tension Strut - Clunk or Rattle|Page 7511 > < Suspension Strut / Shock Absorber|Rear|Page 7502
Page 1
background image

Trailing Arm: Customer Interest
Rear Tension Strut - Clunk or Rattle

Article No. 
93-26-4

12/22/93

^

SUSPENSION - REAR - "CLUNK" OR "RATTLE" FROM REAR TENSION STRUT - WAGON MODELS ONLY

^

NOISE - "CLUNK" OR "RATTLE" FROM REAR TENSION STRUT - WAGON MODELS ONLY

FORD:
1986-94 TAURUS

LINCOLN-MERCURY: 
1986-94 SABLE

ISSUE:
A "clunk" or "rattle" may be heard from the rear of the vehicle when going over bumps or potholes. This may be caused by movement of the rear tension
strut in the body attachment bracket.

ACTION:

Using a torque wrench, hand tighten the body attaching fastener to 115 N-m (85 lb.ft.), Figure 1. The increased clamp load on the bushing inner sleeve
prevents movement, eliminating the noise.

NOTE:
FASTENER PART NUMBERS ARE INCLUDED FOR CONVENIENCE OF REFERENCE. TIGHTEN THE ORIGINALLY INSTALLED
FASTENERS. DO NOT REPLACE PARTS UNLESS REQUIRED.

Parts Block

OTHER APPLICABLE ARTICLES: NONE

Rear Tension Strut - Clunk or Rattle|Page 7511 > < Suspension Strut / Shock Absorber|Rear|Page 7502