Taurus V6-183 3.0L VIN U FI (1993)
Index - Wagon
Installation
1. Position bearing and hub assembly on spindle.
2. Install new hub retaining nut. Tighten to 255-345 N-m (188-254 lb-ft).
3. Install a new grease cap using Coil Remover T89P-19623-FH or equivalent. Tap on tool until grease cap is fully seated.
4. Install rotor assembly on hub. Install two push-on nuts that retain rotor.
5. Install caliper assembly to brake adapter.
6. Install wheel and tire assembly.
7. Lower vehicle.