Taurus V6-183 3.0L VIN U FI (1993)
Fluid Pump: Service and Repair
Oil Pump and Valve Body Assembly
WITH AXOD-E (AX4S)
DISASSEMBLE
Oil Pump From Valve Body Removal
1. Remove two oil pump to valve body attaching bolts.
2. Separate valve body from oil pump and remove gasket.
ASSEMBLE
1. Position valve body on oil pump using a new gasket.
Oil Pump To Valve Body Installation
2. Install oil pump guide pins tool No. T86P-70370-A and valve body guide pin tool No. T86P-70100-C or equivalent as shown in the Oil Pump To
Valve Body Installation image.
3. Install two valve body to oil pump attaching bolts. Tighten bolts.
