Taurus V6-195 3.2L DOHC SHO (1994)
Door, Front-High Series
5. Remove all screws retaining front door trim panel to front door. Using Trim Pad Removing Tool from Rotunda Windshield and Moulding/Trim
Removal Kit 1 07-R0401 or equivalent, pry front door trim panel retaining push pins from door inner panel.
6. Disconnect window regulator safety relay switch wiring. If equipped, disconnect courtesy lamp wiring connector and outside rear view mirror
control wiring.
7. If front door trim panel is to be replaced, transfer all push pins, window regulator control switch and outside rear view mirror control to new front
door trim panel. Replace any bent, damaged or missing push pins.
8. To install, reverse Removal procedure.
