Taurus V6-195 3.2L DOHC SHO (1994)
Door, Rear Switch
2. Remove window regulator control switch or power door lock switch retaining screws. Remove window regulator control switch.
3. Disconnect window regulator safety relay switch wiring from window regulator control switch.
4. Remove screw(s) retaining rear door trim panel to rear door.
5. Using Trim Pad Removing Tool from Rotunda Windshield and Moulding/Trim Removal Kit 107-R0401 or equivalent, pry rear door trim panel
retaining push pins from rear door.
6. If rear door trim panel is being replaced, transfer push pins to new rear door trim panel.
7. To install, reverse Removal procedure.
