Taurus V6-195 3.2L DOHC SHO (1994)
Wheel Speed Sensor: Service and Repair
Toothed Ring
Rear
1. Remove wheel and tire assembly.
2. Remove caliper, rotor and rear hub assemblies.
3. Using arbor press, press hub out of speed sensor toothed ring.
4. Reverse procedure to install.
Removal and Installation
1. Remove wheel and tire assembly.
2. Remove caliper, rotor and hub assemblies.
3. Using a three jaw puller, remove toothed indicator ring from hub.
4. Reverse procedure to install.
