Taurus V6-195 3.2L DOHC SHO (1994)
Fig. 16 Aligning Timing Marks w/Cylinder Head Mating Surface
f.
Tighten chain tensioner to 11-14 ft lb, then rotate camshafts 60° clockwise to ensure proper alignment of timing marks. Marks on camshaft
sprockets should align with cylinder mating surfaces as shown.
Fig. 17 Checking Cam For Proper Position
g. Set camshaft positioning tool T89P-6256-C, or equivalent, on camshafts to inspect for proper positioning as shown. Flats on tool should align
with flats on camshaft. If tool does not line up, repeat installation procedure.