Taurus V6-195 3.2L DOHC SHO (1994)
Evaporator Case: Service and Repair
With Automatic Temperature Control
REMOVAL
Heater And Evaporator Case Removal And Installation
1. Disconnect the battery ground cable.
2. Drain the coolant from the radiator into a clean container.
3. Remove the instrument panel and gently pull it away from the RH side of dash panel.
4. Place a drain pan or suitable container under the heater hose connections at the dash panel.
5. Recover the refrigerant from the A/C system at the service access gauge port valve located on the suction line, please refer to Heating and Air
Conditioning/Service and Repair/ See: Service and Repair
6. Disconnect the condenser to the evaporator tube and the suction accumulator/drier inlet tube from the A/C evaporator core at the dash panel. Cap
