Taurus V6-195 3.2L DOHC SHO (1994)
Fig 25 Caulking Cord Installation
4. Install Caulking Cord D6AZ-19560-A (ESB-M4G32-A) or equivalent to seal the A/C evaporator housing against leakage along the cut line.
5. Install the air inlet duct to the A/C evaporator housing and tighten the two screws.
6. Install the recirculating duct to the A/C evaporator housing and tighten the six screws.
7. Install the vacuum harness to the A/C evaporator housing.
8. Install the foam seals over the evaporator tubes.
9. Assemble the support bracket to the A/C evaporator housing.
10. Install the A/C evaporator housing assembly, please refer to Heating and Air Conditioning/Evaporator Case/Service and Repair/ See: Evaporator
Case/Service and Repair