ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Quick Connect Power Stering Fitting|Page 1648 > < Quick Connect Power Stering Fitting|Page 1646
Page 1
background image

Power Steering Line/Hose: Service and Repair
Reservoir to Cooler Line Replace

High Pressure And Return Line Routing

REMOVAL

1.

Disconnect negative battery cable.

2.

Raise the vehicle on hoist.

3.

Loosen hose clamp at cooler. Disconnect line and drain fluid in a suitable container.

4.

Remove the shift linkage mount bracket from transaxle.

5.

Cut tie straps and remove heat shield around steering gear assembly.

Quick Connect Power Stering Fitting|Page 1648 > < Quick Connect Power Stering Fitting|Page 1646