Taurus V6-195 3.2L DOHC SHO (1994)
Drive Belt Pulleys
10. Remove bolts retaining upper and lower drive belt idler pulleys to engine and remove pulleys.
11. Using strap wrench D85L-6000-A or equivalent, to hold power steering pump pulley, remove nut, washer and remove power steering pulley.
12. Remove retaining bolt from drive belt tensioner and remove drive belt tensioner.
13. Remove upper and center outer timing belt covers.
14. Disconnect crankshaft position (CKP) sensor connectors.
15. Place transaxle in NEUTRAL.
Camshaft Sprocket Marks
16. Set engine to TDC on No. 1 cylinder.
Ensure that "white" index mark on crankshaft vibration damper and pulley aligns with 0 degree index mark on lower outer timing belt cover and
that index marks on intake camshaft sprockets align with index marks on upper inner timing belt cover.
17. Raise vehicle on a hoist.
18. Remove RH front wheel and tire assembly.
19. Loosen fender splash shield and place out of the way.
20. Remove crankshaft vibration damper and pulley using Steering Wheel Puller T67L-3600-A, Step Plate Adapter D80L-630-3 and Screw and
Washer Set T89P-6701-A.
21. Remove lower outer timing belt cover and timing belt guide.
22. Remove upper timing belt tensioner bolt.
23. Slowly loosen lower timing belt tensioner bolt and remove timing belt tensioner.
24. Lower vehicle.
25. Remove belt.
Installation