ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Air Bag Diagnostic Monitor <--> [Air Bag Control Module] > < Disposal Procedures|Page 7726

Taurus V6-195 3.2L DOHC SHO (1994)

Page 3
background image

3. Install lower passenger air bag retaining screws. Tighten to 7-11 Nm (62-97 lb in).
4. Return glove compartment to correct position.
5. Install instrument panel finish panel locator pin into air bag bushing locator then align spear clips and press finish panel into place.
6. Reconnect positive battery cable.
7. Reconnect negative battery cable.
8. Prove out air bag system.

Air Bag Diagnostic Monitor <--> [Air Bag Control Module] > < Disposal Procedures|Page 7726