Taurus V6-195 3.2L DOHC SHO (1994)
Seat Belt: Service and Repair
Removal and Installation
Center Rear Belt Assembly - Sedan
REMOVAL
1. Remove rear seat back and cushion.
2. Remove rear safety belt and buckle anchor nuts and remove rear safety belt and buckle.
3. Remove retaining bolt to both rear seat retractors. Remove retractors.
INSTALLATION
1. To install, reverse removal procedure, being sure to position safety belts and retractor as shown.
2. Tighten all retaining nuts to 30-40 Nm (22-30 lb ft). Cycle system to ensure proper operation of retractor. Ensure safety belt is not twisted.
Front Seat Safety Belts
