Taurus V6-195 3.2L DOHC SHO (1994)
Ignition Switch Mechanical Test
Test the mechanical operation of the ignition switch by rotating the ignition switch through all positions. The movement should feel smooth with
no sticking or binding. The ignition switch should return from the START position back to the RUN position without assistance (spring return). If
sticking or binding is encountered, check the following:
-
Burrs on the lock cylinder key.
-
Binding ignition switch lock cylinder.
-
Steering column shroud rubbing against ignition switch lock cylinder.
-
Burrs or foreign material around rack-and-pinion actuator in lock cylinder housing.
-
Insufficient lubricant on actuator.
NOTE: Do not apply lubricant to inside of the ignition switch.
-
Binding ignition switch.
Turn Signal and Windshield Wiper Switch Continuity Test
Turn Signal and Windshield Wiper Switch Continuity Test
Test for electrical malfunctions with continuity tester and an ohmmeter, such as Rotunda Digital Multimeter 007-00001 or equivalent.