Taurus V6-195 3.2L DOHC SHO (1994)
6.
Lower vehicle.
7.
Loosen hose clamp at reservoir and disconnect return line.
8.
Remove the line from vehicle.
INSTALLATION
1.
Position line in vehicle.
2.
Connect hose to reservoir and tighten clamp to 13-17 lb. in. (1.4 - 2.0 Nm).
3.
Raise vehicle.
4.
Position heat shield around steering gear assembly and install tie straps.
5.
Install shift linkage mount bracket to transaxle.
6.
Connect line to cooler and tighten clamp to 13-17 lb. in. (1.4-2.0 Nm).
7.
Lower vehicle.
8.
Connect negative battery cable.
9.
Fill system,
