Taurus V6-195 3.2L DOHC SHO (1994)
4. Raise vehicle on a twin post hoist and remove front wheel and tire assemblies.
5. Support vehicle with jackstands under rear edge of front sub-frame (5C145).
6. Remove front wheel spindle connecting rod or end cotter pins and nuts, and remove front wheel spindle connecting rod or ends from front wheel
knuckle (LH)/ front wheel knuckle (RH).
7. Remove front wheel spindle connecting rod or ends from shaft.
Mark position of jam nut to maintain alignment.
8. Remove nuts from steering gear-to-front subframe retaining bolts.
9. Remove rear subframe-to-body retaining bolts.
10. Remove exhaust system flex tube-to-dual converter Y pipe attachment.
11. Lower twin post hoist carefully until rear sub-frame (5R003) separates from body, approximately four inches.
12. Remove heat shield band and fold shield down.
