Taurus V6-195 3.2L DOHC SHO (1994)
Knuckle And Hub
4. Place Front Bearing Spacer T86P-1104-A2 or equivalent on the arbor press plate and position hub on tool with lugs facing downward. Position
front wheel knuckle assembly (outboard side down) on the hub barrel. Place Bearing Remover T83P-1104-AH2 or equivalent flat side down,
centered on inner race of the bearing and press down on tool until bearing is fully seated onto hub. Ensure that hub rotates freely on front wheel
knuckle after installation.
