Taurus V6-195 3.2L DOHC SHO (1994)
Shift Cable: Service and Repair
NOTE: Whenever the transmission shift cable and bracket is removed from the cable retaining brackets for any reason, the cable must be replaced.
NOTE: Whenever a steering column, engine, or transaxle removal is required, do not remove the transmission shift cable and bracket from the retaining
brackets. The bracket must be removed with the cable attached.
REMOVAL
1. Remove the console. Disconnect the transmission shift cable and bracket and remove the shift control selector lever and housing.
2. Pull back the floor carpet.
Transmission Shift Cable And Bracket
3. Remove the cable bracket to dash panel retaining screw.
4. Disengage the rubber grommet from the front floor pan by pushing it toward the passenger compartment.
Transmission Shift Cable And Bracket Removal
5. Remove the retaining nut and the transmission shift cable and bracket from the transaxle manual control lever.
6. Remove the cable retaining clip from the cable bracket on the transaxle.
7. Remove the transmission shift cable and bracket from the bracket.