Taurus V6-195 3.2L DOHC SHO (1994)
Ignition/shifter Interlock Assembly
8. Pull the transmission shift cable and bracket through the front floor pan into the passenger compartment.
INSTALLATION
1. From inside the passenger compartment, feed the round end of transmission shift cable and bracket through the front floor pan.
2. Press the rubber boot on the transmission shift cable and bracket into the body panel opening. Install the cable bracket and the floor carpet.
3. Install the bushing and the transmission shift cable and bracket into the snap retainer on the shift control selector lever and housing.
4. Position the transmission shift cable and bracket in the shift control selector lever and housing. Install the retaining screws.
5. Install the shift control selector lever and housing.
6. Place the selector lever in the OVERDRIVE position against the rearward stop. The selector lever must be held in the rearward position while
