Taurus V6-195 3.2L DOHC SHO (1994)
attaching the other end of the transmission shift cable and bracket. Position the cable into the cable bracket on the transaxle and install the retainer
clip.
7. Attach the transmission shift cable and bracket to the transaxle lever and install the retaining nut.
8. Shift the transaxle lever into the OVERDRIVE position, the second detent from the full rearward position.
9. Place the cable end on the transaxle manual lever stud, using care to align the flats on the stud with the slot in the transmission shift cable and
bracket. Start the retaining nut.
10. Make sure the selector lever has not moved from the OVERDRIVE detent, then tighten the nut.
11. Check the transaxle operation in each selector lever detent position. Ensure the park mechanism and park/neutral position switch function
properly.
