Taurus V6-195 3.2L DOHC SHO (1994)
5. Clean valves, springs, and valve body as required.
ASSEMBLE
1. Install valves and springs into valve body, as shown in the Valve Body Assembly image.
2. Install check balls, relief valves, and bypass solenoid filter, as shown in the Valve Body Check Balls, Relief Valves, And Filter image.
3. Position separator plate with new gasket on valve body.
Valve Body Separator Plate Installation
4. Install separator plate guide pins tool No. T86P-70100-A or equivalent as shown in the Valve Body Separator Plate Installation image.
5. Install two Torx bolts and tighten, then remove guide pins.
