Taurus V6-232 3.8L (1989)
16 TOOTH SPLINE COMPRESSOR
If a 16 tooth spline compressor is not available, replace it with a 21 tooth spline compressor. It will also be necessary to replace the clutch hub assembly
with a 21 tooth spline clutch hub. If the clutch pulley has grooves worn into the friction surface, it should be replaced.
21 TOOTH SPLINE COMPRESSOR AND/OR CLUTCH HUB ASSEMBLY
Job # 1, 1992 and beyond ... Replace with 21 tooth spline components. Clutch hub assembly and compressor are ordered separately.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:
208000
