Taurus V6-232 3.8L (1989)
Fig 23 Evaporator Core Removal From Case
9. Fold cutout cover back from opening and lift evaporator core from case (Fig. 23).
Installation
1. Transfer two foam core seals to new evaporator core.
2. Position evaporator core in case and close cutout cover.
Fig 24 Cutout Cover Securing In Closed Position
3. Install spring nut on each of two upright tabs and adjacent holes drilled in front flange.
Ensure hole in spring nut is aligned with 3/16-inch holes drilled in tab and flange.
Install and tighten screw in each spring nut (through hole in tab or flange) securing cutout cover in closed position (Fig. 24).
