ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

EEC IV Test Plug - Heat Damage|Page 3348 > < Diagram Information and Instructions|Page 3339
Page 1
background image

Data Link Connector: Customer Interest
EEC IV Test Plug - Heat Damage

Article No. 91-3-5

EEC IV - TEST PLUG DAMAGE BY HEAT FROM EXHAUST MANIFOLD

FORD: 1989-90 TAURUS

LINCOLN-MERCURY: 1989-90 SABLE

Figure 1

This TSB article is being republished in its entirety to better identify the different terminals in Figure 1.

ISSUE:

The EEC IV test plug may become dislodged and come too close or touch the exhaust manifold. This can cause damage to the cover or plug.

ACTION:

If service is required, install a new cover, test plug or terminals as required. The EEC IV test plug is located in the engine compartment,
RH side of the safety wall. There are three possible areas of damage:

^ If only the test plug cover is damaged, snap on a new cover (E7DZ-14A428-A).

^ If the test plug cover and test plug are damaged, replace both cover (E7DZ-14A428-A) and test plug (D9AZ-14489-U).

^ If the test plug cover, test plug and terminals are damaged, replace all components. Refer to Figure 1 for the proper location of the crimp-on

terminals.

PART NUMBER

PART NAME

CLASS

E7DZ-14A428-A

Test Plug Cover

C

D9AZ-14489-U

Test Plug                     

B

D8BZ-14474-C

Terminal (4 req.)

BM

D9AZ-14474-F

Terminal (1 req.)

B

OTHER APPLICABLE ARTICLES:

None

SUPERSEDES:

91-1-6

WARRANTY STATUS:

Eligible Under Basic Warranty Coverage

OPERATION DESCRIPTION

TIME

910305A

Replace Cover

0.1 Hr.

910305B

Replace Cover And Plug

0.2 Hr.

910305C

Replace Cover, Plug And

0.5 Hr.

Terminals 

DEALER CODING
 

EEC IV Test Plug - Heat Damage|Page 3348 > < Diagram Information and Instructions|Page 3339