Taurus V6-232 3.8L (1989)
Figure 3
1.
Do not clean the black plastic air by-pass valve, Figure 1. This valve cannot be cleaned with carburetor cleaner because it can damage the valve's
internal components.
CAUTION: IF THE BLACK PLASTIC AIR BY-PASS VALVE REQUIRES SERVICE, IT MUST BE REPLACED.
2.
The silver metal air by-pass valve can be cleaned. Use carburetor cleaner (D9AZ-19579-BA) to clean it.
3.
Mount the black plastic air by-pass valve with the electrical connector on the in-board side of the throttle body, Figure 3. Do NOT mount it on the
rocker cover side of the throttle body.
4.
Reinstall the silver metal air by-pass valve in the same position as it was originally installed.
PART NUMBER
PART NAME
CLASS
D9AZ-19579-BA
Carburetor Cleaner - Pkg. of 12
B
E9SZ-9F715-E
Air By-Pass Valve - Black
B
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:
4600