Taurus V6-232 3.8L (1989)
Seat Belt: Description and Operation
Shoulder Harness
The shoulder harness webbing is fixed in a retractor which is located on the B-pillar post or in the quarter panel. This retractor is designed to let the
webbing freely move in or out at all times, except during vehicle deceleration, when it is automatically locked by a mechanically actuated inertia sensor.
The center lap safety belts do not have retractors.
The shoulder harness is guided through the web guide which is mounted on the B-pillar and inside of the scuff plate/center pillar trim panel.
The shoulder harness webbing is attached to a retractor. The retractor is located in the B-pillar. The webbing then passes through a guide above and
behind the occupant's shoulder which directs the webbing at the proper downward angle over the occupant's shoulder and chest and attaches to the lap
safety belt buckle.
The shoulder harness retractor is designed to let the webbing freely move in or out at all times, except during vehicle deceleration, when it is
automatically locked by a mechanically actuated inertia sensor.
