ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Deck Lid - Emblem Upgrade|Page 8482 > < Deck Lid - Emblem Upgrade
Page 2
background image

To identify the eligible vehicles, review the following features. The SEL has illuminated visors (Figure 2) and automatic headlamps (Figure 3). The SES
has illuminated visors (Figure 2) and manual headlamps.

Obtain the additional letters to convent a Taurus SE to an SEL or SES by ordering a "TAURUS LX" Emblem (YF1Z-7442528-AA) and using the "L" or
"S" from that emblem.

1.

Clean the area around the decklid Taurus SE emblem.

2.

Tape the location template below the existing emblem (Figure 1). The left most vertical line on the template should be aligned with the right side
of the letter "E" on the vehicle's emblem.

3.

Cut the desired letter from the "TAURUS LX" emblem.

NOTE:

KEEP THE CLEAR PLASTIC AND PAPER TAPE BACKING ON THE LETTERS.

4.

Hold the letter by the clear plastic and remove the paper tape backing from the letter.

5.

Holding the emblem by the ends of the clear plastic, line up the letter within the right two lines on the template and affix letter by applying gentle
pressure.

Deck Lid - Emblem Upgrade|Page 8482 > < Deck Lid - Emblem Upgrade