Taurus V6-3.0L DOHC VIN S (2000)
1
Attach a driver safety belt pretensioner restraint system diagnostic tool to the ten-pin floor electrical connector.
2
Attach a restraint system diagnostic tool to the driver seat side air bag floor electrical connector (if equipped).
NOTE: The restraint system diagnostic tools for the driver and passenger safety belt pretensioners are similar but not interchangeable. Make
sure to install the correct tool in the correct connector.
5. Disconnect the passenger seat side air bag (if equipped) and ten-pin electrical connectors.
6. Attach the diagnostic tool(s) to the passenger seat electrical connector(s).
1
Attach a passenger safety belt pretensioner restraint system diagnostic tool to the ten-pin floor electrical connector.
2
Attach a side air bag restraint system diagnostic tool to the passenger seat side air bag floor electrical connector (if equipped).
NOTE: The restraint system diagnostic tools for the driver and passenger safety belt pretensioners are similar but not interchangeable. Make
sure to install the correct tool in the correct connector.
7. Remove the driver seat front bolt trim covers.
8. Remove the driver seat front bolts.
9. Position the driver seat forward.
