Taurus V6-3.0L DOHC VIN S (2000)
22. Unclip the J-clip.
23. Position the upholstery and pad, then remove the bolts and latch.
INSTALLATION
1. Position the latch and install the bolts.
2. Position the upholstery and fasten the J-clip.
3. Install the seat backrest. For additional information, refer to Front Seat Backrest-Driver Side.
4. Remove the driver safety belt pretensioner restraint system diagnostic tool from the ten-pin floor electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
