Taurus V6-3.0L DOHC VIN S (2000)
26. Carefully pull out on the outer side shield releasing the two hidden Clips (shown) to the inner side shield and the two hidden clips to the recliner
mechanism.
27. Remove the outer side shield.
1
Carefully pull out on the side of the outer side shield releasing the clips to the inner side shield and one hidden clip at the side of the seat
cushion frame.
2
Carefully pull forward on the side shield releasing the hidden clip at the front of the seat cushion frame.
3
While routing the wire harness out of the seat cushion frame, slide the side shield forward to clear the recliner handle and remove the outer
side shield.
28. Remove the screws and the switch.
INSTALLATION
1. Position the switch and install the screws.
