Taurus V6-3.0L DOHC VIN S (2000)
3. Note: If brake drums will not come off, follow these steps.
Loosen the brake shoe adjusting screw nut.
1
Using a screwdriver, move the brake shoe adjusting lever off the brake adjuster screw.
2
Note: Move the adjustment tool handle downward to loosen the brake shoe adjusting screw nut.
Use the Brake Adjustment Tool to loosen the brake shoe adjusting screw nut.
4. Using the special tool, measure the brake drum inside diameter.
-
Install a new brake drum if the maximum inside diameter exceeds the specification molded into the brake drum.
Installation
1. Note: If adjusting the rear brakes, refer to Brake Shoe Adjustment-Drums Removed.
Follow the removal procedure in reverse order.
