Taurus V6-3.0L DOHC VIN S (2000)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Disconnect the speed control servo electrical connector.
^
Depress the connector tab.
^
Disconnect the connector.
3. Release the speed control cable cap.
1
Depress the speed control cable cap retaining tab.
2
Rotate the speed control cable cap counterclockwise and pull the cable cap away from the servo housing.
4. Disconnect tile speed control cable.
1
Depress the spring retainer.
2
Slide the core wire end out of the speed control servo pulley and disconnect the speed control actuator cable.
