Taurus V6-3.0L DOHC VIN S (2000)
Deactivator Switch: Service and Repair
REMOVAL
1. Remove the deactivator switch.
1
Disconnect the electrical connector.
2
Rotate counterclockwise 45 degrees and remove the deactivator switch.
INSTALLATION
1. Release the plunger lock.
^
Turn the lock knob counterclockwise until first click is felt.
2. Fully depress the brake pedal.
3. Install the deactivator switch.
1
Position the deactivator switch in the bracket and rotate clockwise 45 degrees.
2
Connect the electrical connector.
4. Slowly release the brake pedal and tug moderately once the pedal reaches the rest position.
NOTE: There should be an extra click heard when tugging on the brake pedal.