Taurus V6-3.0L DOHC VIN S (2000)
Valve Cover: Service and Repair
RH
Removal
1. Remove the upper intake manifold.
2. CAUTION: When removing the coils a slight twisting motion wiI1 break the seal and ease the removal.
Remove the RH coil-on-plugs.
1. Disconnect the three electrical connectors.
2. Remove the three bolts.
3. Remove the RH coil-on-plugs.
3. Disconnect the electrical connectors.
1. Disconnect the differential pressure feedback Exhaust Gas Recirculation (EGR) electrical connector.
2. Disconnect the Heated Oxygen Sensor (HO2S) electrical connector.
3. Disconnect the ignition interference capacitor electrical connector.
4. Disconnect the wiring harness from the LH valve cover stud and position aside.
