Taurus V6-3.0L DOHC VIN S (2000)
9. Remove the EGR Vacuum Regulator (EVR) valve.
1. Disconnect the vacuum hose.
2. Disconnect the electrical connector.
3. Remove the bolts.
4. Remove the valve.
10. Remove the eight bolts and the upper intake manifold.
-
Remove and discard the gaskets.
-
Clean all mating surfaces.
Installation
1. Position new gaskets in the upper intake manifold.
2. Position the upper intake manifold and install the bolts in the sequence shown.
3. Install the EGR vacuum regulator valve.
