Taurus V6-3.0L DOHC VIN S (2000)
Refrigerant Pressure Sensor / Switch: Service and Repair
Compressor Cut-Off/Cycling Switch
REMOVAL
1. Disconnect the A/C cycling switch electrical connector.
2. Remove the A/C cycling switch. Remove and discard the O-ring seal.
-
During installation, install a new O-ring seal lubricated with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft
YN-12-C), or equivalent meeting Ford specification WSH-M1C231-B.
INSTALLATION
1. To install, reverse the removal procedure.