Taurus V6-3.0L DOHC VIN S (2000)
Technical Service Bulletin # 02-5-1
Date: 020301
Brake Lamps - Remain Illuminated
Article No.
02-5-1
03/01/02
^
BRAKES - BRAKE LAMPS REMAIN ILLUMINATED
^
ELECTRICAL - LAMPS - BRAKE LAMPS REMAIN ILLUMINATED
FORD:
2000 TAURUS
MERCURY:
2000 SABLE
ISSUE
On some vehicles, there may be an inadvertent stop lamp switch activation with the brake pedal not depressed. This may be caused by the stoplamp
switch wire harness.
ACTION
Install a new Stoplamp Switch Jumper Harness.
Refer to the following Service Procedure for details.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
020501A
Install New Stoplamp
0.6 Hr.
Switch Jumper Harness
DEALER CODING
CONDITION
BASIC PART NO.
CODE
14A411
42
OASIS CODES: 201000, 201200, 203200, 301000
Service Procedure
NOTE
IF EQUIPPED, MOVE THE ADJUSTABLE PEDALS TO THE FULL FORWARD POSITION FOR EASIER ACCESSIBILITY.
1.
Install a memory sayer, then disconnect the battery negative cable.
2.
Remove the instrument panel (I/P) lower steering column cover.