Taurus V6-30L DOHC VIN S (2000) Daytime Running Lamp Relay Location | Component Information
COMPONENT TESTING PROCEDURE (voltage applied)
Disconnect the ohmmeter; connect pins 2 and 3 to 12 V DC power and pin 1 to ground. Measure voltage between pin 5 and pin 1. If the voltage is 12 V,
continue with the test. If not, replace the relay. Disconnect power from pin 2 and measure voltage between pin 4 and pin 1. If the voltage is 12 V, the
relay is okay. It not, replace the relay.
