Taurus V6-3.0L DOHC VIN S (2000)
Ignition Coil: Service and Repair
Coil-On-Plug - RH
REMOVAL
NOTE: Upper intake manifold removed for clarity.
1. Remove the ignition coil-on-plug.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Remove the coil-on-plug.
INSTALLATION
1. To install, reverse the removal procedure.
^
Apply a light film of Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A or equivalent meeting Ford specification
ESE-M1C171-A to the insulator of the spark plug prior to installation.
