Taurus V6-3.0L DOHC VIN S (2000)
1.
Reprogram the Powertrain Control Module (PCM) using the applicable calibration code from the calibration chart. Use one (1) of the following
two (2) methods:
^
Service Bay Technical System (SBTS) and the New Generation STAR (NGS) Tester with Rotunda Flash Cable (007-00531) and Rotunda
Flash Card (007-00532).
^
Worldwide Diagnostic System (WDS), with the latest available software level.
NOTE:
You may be required to enter the tire size (797) and the final drive ratio (3.47) during the reflash procedure.
PREPARING AUTHORIZED MODIFICATIONS LABEL