Taurus V6-3.0L DOHC VIN S (2000)
Remove the Output Shaft Speed OSS Sensor cover.
1
Remove the connector.
2
Remove the bolt.
3
Remove the cover.
13. Remove the Output Shaft Speed (OSS) sensor.
14. To install, reverse the removal procedure
Turbine Shaft Speed (TSS) Sensor
Removal and Installation
1. Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.
3. Remove LH front wheel and tire.
4. Disconnect the Turbine Shaft Speed (TSS) sensor connector.