Taurus V6-3.0L DOHC VIN S (2000)
2. Remove or position anything out of the way that may be blocking the accessibility to the I/P alignment rails or holes.
3. NOTE: Check the positioning of the passenger air bag module J-nuts before positioning the passenger air bag module to the I/P.
Connect the passenger air bag module electrical connector.
1. Position the passenger air bag module and trim cover to the I/P.
2. Install the wire harness pin-type retainer to the passenger air bag module.
3. Connect the passenger air bag module electrical connector.
4. Position the passenger air bag module alignment channels to the alignment rails of the I/P.
5. Install the passenger air bag module and trim cover into the I/P.
NOTE: Left hand upper alignment pin shown, left hand lower alignment pin is similar.
Starting at the left hand side of the trim cover, install the upper and lower alignment pins into the I/P.
6. Working from left to right, install all the trim cover retaining tabs and alignment pins into the I/P.
