Taurus V6-3.0L DOHC VIN S (2000)
Installation
1. Position the RCM.
1. Position the RCM to the center tunnel area.
2. Install the bolts.
3. Position the carpet back at the right hand side of the center tunnel area under the instrument panel (I/P).
2. Install the RCM (14B321).
1. Install the bolt.
2. Connect the RCM electrical connectors.
3. Engage the RCM electrical connector locking clips.
4. Position the carpet back at the left hand side of the center tunnel area under the I/P.
3. Repower the system. For additional information, See: Air Bag Systems/Air Bag(s) Arming and Disarming/Service and Repair
