Taurus V6-3.0L DOHC VIN S (2000)
18. Connect the passenger seat side air bag (if equipped) and ten-pin electrical connectors.
19. Remove the restraint system diagnostic tool front the vehicle harness side of the passenger air bag electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
20. Install the passenger air bag.
21. Remove the restraint system diagnostic tool front. The vehicle harness side of the four-pin air bag sliding contact electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
22. Connect the four-pin air bag sliding contact electrical connector at the base of the steering column.
