Taurus V6-3.0L DOHC VIN S (2000)
5. Remove the Passenger Safety Belt Pretensioner Restraint System Diagnostic Tool from the ten-pin floor electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
6. Position the seat into the vehicle. Connect the ten-pin floor electrical connector to the passenger seat.
7. Install the passenger seat rear nuts.
8. Install the passenger seat rear trim covers.
9. Connect the battery ground cable.
10. With the restraint system diagnostic tools still installed at the remaining deployable devices, prove out the air bag system.
11. Position the passenger seat to its rearmost position.
12. Disconnect the battery ground cable and wait at least one minute.
