Taurus V6-3.0L DOHC VIN S (2000)
2. Remove the safety belt buckle assembly.
1
Using special tool 501-010 (T77L-2100-A), remove the bolts.
2
Remove the safety belt buckle assembly.
3. To install, reverse the removal procedure.
^
See the removal procedure or Specifications for torque specifications.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten the bolts to specification.
^
Make sure that the safety belt buckles are accessible after seat installation.
4. Check the restraint system for correct operation.